1、Toothed tape enhances wear resistance and sealing performance;

2、Toothed tape is filled with elastic elements, good elasticity and large compensation range;

3、Large contact area with tank wall, good sealing effect;

4、Applicable to all kinds of steel external floating disk storage tanks.

Fluorine rubber, Nitrile rubber, EPDM, XPE, etc.

Common specifications: 1400x1.5+1.5 (toothed tape)

Fluorine rubber, Nitrile rubber, EPDM rubber, etc.

Common specifications: 1050x3.0

1、Toothed wear-resistant sling enhances the wear-resistant and sealing performance, and effectively protects the internal liquid-filled hose;

2, the liquid-filled hose can be filled with liquid to better meet the sealing ring space spacing changes during the operation of the floating disk, sealing automatic compensation performance is good;

3, large contact area with the tank wall, good sealing effect:

4、Applicable to all kinds of steel external floating disk storage tanks.

Fluorine rubber, Nitrile rubber, EPDM rubber, etc.

Common specifications: 4300x2.0

1. The secondary seal can be matched with any form of primary seal to form a double-layer seal;

2. Installation without fire, and the primary seal share the fixed parts, which is conducive to the transformation of IE tanks;

3. Constituting a double-layer seal with the primary seal, safety is improved.

4. Blocking rainwater from soaking into the tank, meanwhile blocking the volatilization of oil and gas, and playing a protective role for the primary seal, effectively prolonging the service life of the primary seal.

5. Equipotential cable eliminates static electricity generated during operation.

Nitrile, Fluorine rubber, Chlorosulfonated polyethylene

Common specifications: (1.0+1.5) width

1. Oil-free gas seal (burst suppression film) for a whole, continuous coverage in a secondary seal between the joints using a special adhesive bonding, lap width shall not be less than 300mm.

2 oil-free gas seal (burst suppression film) between one and two seals, and the tank wall should be maintained between 5-10mm gap, the rubber band should be uniformly wrinkled, no distortion.

3 oil-free gas seal (burst suppression film) by its own serrated counterweight, in the case of vertical tank walls to ensure that parallel to the tank wall.

4. Oil-free air seal (burst suppression membrane) after installation and the secondary sealing mesh membrane to form a sealed air bladder, reducing one or two seals between more than 95% of the oil and gas space; air bladder for the atmospheric state, in addition to their own gravity does not exert any extrusion pressure on the secondary seal.

5 oil-free air seal (burst suppression film) on the lower part of the fixed and a secondary seal with a common fasteners.

6. Explosion suppression type secondary seal for storage tanks is applicable to the temperature range of -30 ℃ ~ 70 ℃.